You noticed your keyboard has dirt, some keys are stuck, some keys are not registering properly …or maybe you just spilled some coffee on your keyboard. What do you do now?
The answer is plain and simple: clean it. Here’s how to clean a Corsair Vengeance K70.
The Corsair Vengeance K70 comes with Cherry MX Red key switches, ten contoured buttons for gaming, anti-ghosting, adjustable back-lighting, multimedia controls and even a detachable wrist rest. For those of you not familliar with what I am talking about, this is a Corsair Vengeance K70:
Cleaning the keyboard
Here’s what you will need in order to clean the K70 (this also applies to other mechanical keyboards too):
- Paper towels
- Ear buds
- Warm water
Some people might recommend some canned air or an air compressor, but in my opinion, they’re not necessary.
To start off with the cleaning of your keyboard, take a picture of the keyboard and then remove all of the keys using a keycap puller or, if you do not have one, remove all of the keys one by one manually. Be very careful when removing larger keycaps, they usually have their own stabilizers. Some keyboards come with a wire stabilizer for larger buttons, but this isn’t the case with the K70.
Here’s how Corsair’s Cherry MX Red switches look like when the keyboard is dirty:
The keys don’t look all too pretty when the keyboard is dirty either:
In order to clean the dust and dirt between the switches and on the keys, take some ear buds, pour some warm water on them and sweep the dirt away. Do the same with the keys. Repeat the process until you clean the switches and the keys. Be sure to clean the whole keyboard plate. You can also clean the keys using warm water and some dishwashing soap. The switches, when clean, should look something like this:
After you have cleaned the switches and the keycaps, lay out all of the keycaps on a paper towel and leave them to dry. Do not use a hair dryer – the heat coming out of it might cause harm to the keycaps (it might cause the keycaps to bend).
Final touch – reinstating the keycaps
In order to bring the keyboard back to its former shape, use the snapshot you took earlier to reinstall all the keys into their former positions. After you’ve successfully done that, you’re pretty much done. Here’s how the keyboard should look like now:
Share on TwitterShare on FacebookShare on Reddit
How to deep-clean your mechanical keyboard
It’s easy to turn a blind eye to what festers beneath the surface of your mechanical keyboard. Even if you’re the type of person who gives their keyboard the occasional surface wipedown (you’re better than most of us), a lot of grime slips through the cracks between your keys and builds up over the months and years.
So once in a while, you need to face up to the horror and give your keyboard a deep clean - pull off the keycaps, wash them, clean the whole thing down, and get it back into the state it deserves to be in.
Here are the things you’ll need to deep-clean your mechanical keyboard:
- Prying tool/flathead screwdriver/keycap remover
- Washing-up liquid
- Microfibre cloth
- Surface cleaner/70% isopropyl solution
- Q-tips/cotton sticks
- Vacuum cleaner
Removing the keycaps
The first keycap you remove should be the space bar, because once that’s off it will be much easier to remove the keys above it.
You might not be able to pull the space bar up like regular keys, as it could be hooked onto a stabiliser - a long metal bar ensuring that larger buttons press down evenly no matter where on the button you press.
Unless you’re using a keycap puller (which makes the job quite a bit quicker), stick your prying tool of choice under the bottom side of the space bar, then run it along and gently lever it up to detach the keycap from the switch beneath (you should feel a gentle ‘pop’ when you do so).
You may need to lift the space bar slightly then pull it towards the left or right to get it off the hooks. Do all this /very/ gently.
Other large keys that tend to use stabilisers are Enter, Shift, Backspace, 0/Ins and the big ‘+’ key. When you get to them, remove them with the same technique as the space bar.
After that, move onto the rest of the keys on the keyboard. Try to lever them from the underside, and chuck each key into a bowl that you’re going to wash them all in later. Some keys may come off easily, others may be a little resistant then pop into the air.
Keys surrounded by the keyboard’s chassis - like the directional arrows - might be easier to remove with a thinner tool, like tweezers.
Next, it’s time to vacuum-clean the keyboard. First, dislodge as much dirt as you can (and pull out a bunch of cat fur, in my case) by running the tweezers all the way along in the channels between the keys. This will loosen things for the vacuum cleaner to suck up.
Then, gently and carefully run your vacuum along your keyboard, being particularly careful to avoid contact with the glass sensors if your key switches have them.
If you have a thin enough vacuum end, focus on getting between the keys rather than the switches themselves, which should be pretty clean anyway due to having been covered by the keycaps all this time.
The vacuum won’t clean up the deep-seated grime, nor will it pull away fur or hair that’s tangled under the keys. If there are still big bits of dirt or hair stuck in the keyboard, run through it with the tweezers again, pluck any straggling furs, then vacuum up again.
Repeat until all the big debris from your keyboard is gone. Here’s my keyboard after vacuuming. It’s not perfect yet, but much better than it was.
Wash all the keys
Throw all your keycaps into a washing bowl, cover them in hot water, and add a bit of dish soap. Leave them to soak for a few hours. When they’re done, rinse them in non-soap water, gently scrubbing them with a microfibre cloth to dry them and wipe off any residual grime on them.
Lay out a towel, and let the keys dry on it. First leave them face up for a few hours to let the water drain from the inside, then turn them over and leave them face-down overnight - it’s very important that the underside of the keycaps dries fully, as this is the part that makes contact with sensitive components.
Cotton swab cleaning
While the keys are having their bath, it’s time to get rid of the grime that’s settled between the keys. One preferred method for this is to use a cotton swab soaked in isopropyl alcohol, because this stuff cleans well, evaporates quickly, and is lethal for bacteria.
Try not to snag the cotton swab on the key switches, and move onto a new cotton swab as soon as the one you’re using starts to fray. You don’t want bits of cotton snagging on your key switches. Rub firmly with the cotton swabs, focusing on the dirty areas between the keys rather than the keys themselves - keep contact with the actual switches to a minimum.
Stick the keycaps back on
Once all the keycaps are dry, stick them back on the keyboard.
This should be much simpler than removing the keys. Start with putting the keys requiring stabilisers back on, as they can be awkward to get on once other keys are around them.
We found it easiest to leave the stabiliser on the keyboard, hook on one side of the key, then get the second hook on from there.
After getting the big keys on, pop each of the keycaps back in its rightful place. This is a close-up of what our keyboard looks like after cleaning. It’s a pretty worn old thing, but it’s looking a lot more dignified now.
Your mechanical keyboard is now as good as nearly-new. Those keys will clack clearly now they're not cushioned by a bed of fur and filth.
Robert Zak is a freelance writer for Official Xbox Magazine, PC Gamer, TechRadar and more. He writes in print and digital publishing, specialising in video games. He has previous experience as editor and writer for tech sites/publications including AndroidPIT and ComputerActive! Magazine.
How to Clean Corsair Keyboard – Easy Way to Follow
How to clean the Corsair keyboard? Well, that’s not much of an issue. We can’t deny the fact, our tables are multi-purpose desks and no less than battle stations. You are eating lunch or mid-day snacks at the same time you are responding to the slack messages, or sometimes play PC games non-stop.
Some of us are very cleaning conscious about our PCs, but some of us are those who let the dust gather on our gaming setups.
Dust and little food crumbs are enough to make your keyboard messy, greasy, and unhygienic. Not only that, but it also disrupts the functionality of the peripherals.
But don’t you let the Dorito dust wreak havoc on your typing tools. After one year of use, it’s time to wash and clean more than your hands so gather your cleaning supplies because in this article we are going to learn how to clean the corsair keyboard.
As you know that the corsair keyboards are made up of premium materials, so when the keyboards get greasy, the very first questions that put up is how to clean corsair keyboards.
Well, they are mechanical keyboards, so they get grimy, greasy, and dirty quickly, so you need to keep them clean. This article is a step-by-step guide on how you can clean the corsair keyboard to make it feel like it’s new and free from grease and dirt.
Things you need to clean the corsair keyboard
Before cleaning the corsair keyboard, here are some essentials tools that you will be needing in this process. These tools will perform the best to clean the corsair keyboard deeply even the RGB lighting. So let’s get started with the process:
- Alcohol or spirit
- Keycap remover or screwdriver
- Swaps or earpicks
- Micro Fiber cloth
- Wet old paper towel
After you gather all these things together the next step is to clean the corsair keyboard.
How to Clean Corsair Keyboard
To make the process easy we have put it together in the step-by-step process that will help you clean your keyboard.
When we look inside the keyboard the very first thing, we get to see is the wrist rest that allows you to have a comfortable type, play, and work with the keyboard efficiently. The very first step is to remove the wrist rest from the keyboard and then clean the keyboard.
Follow the guide written in the next section to clean the wrist rest of your keyboard.
(If your keyboard doesn’t have wrist rest, then skip this step.)
Now, it’s time to remove the keyboard keys, but for that, you have to turn the keyboard upside down to remove the big chunks from your keyboard.
How to remove the keys from the corsair keyboard is the common question that most mechanical keyboard users ask. Well, you can use a screwdriver or a keycap remover that easily available on amazon or any computer near you.
Remove the keys using keycap remover.
After removing the keys, to clean the keyboard, the next question that comes your way that how to clean the spacebar on the mechanical keyboard. Don’t worry, it’s not a hassle, all you need to do is to apply a little force from both sides and the space bar will come out as it comes with the spring mechanism. So, with little force, it’ll come out.
Because of the dust, you be able to hear some noise when you press the keyboard keys, but don’t worry after this method, you won’t be hearing them anymore.
Alert: before you take out the keys, make sure you take a picture of your keyboard to remember that the actual position of the key so that you apply them easily.
After you remove the keys, you will get to see the RGB switches on your keyboard and you will see a junk of debris and dust, etc. So, here you need a brush to clean the remove all the external dirt and debris from your keyboard.
Now, it’s time to clean the keyboard internally from all the dust and dirt particles. Within the steps, you will use a wet paper towel to clean the keyboard. On the other side, you can use cotton swabs and earpicks to reach the deeper areas that you can’t access. You can damp the wet paper towel to use for the cleaning of the keyboard under switches.
Tip: Clean the keyboard using a paper towel or swab with a sensitive hand to prevent it from damaging.
By following the steps written below, you can clean 90% of the keyboard. In the last step, you will need to all the removed keys back to their original position after the cleaning process. For this purpose, clean each key with a microfiber cloth. Now, after cleaning the keys, place all the keys in the original position with the help of a picture.
And it’s done.
Cleaning the wrist rest in your corsair keyboard
Before you clean the keys of the keyboard, you need to remove the wrist rest which you can separate easily. Here’s how you can clean the wrist rest on your keyboard.
- The very first thing you need to do is to sprinkle the dish soul over the corsair keyboard.
- After spraying the alcohol or dishwasher, use the bush to clean the wrist rest of the keyboard.
- You need to clean the wrist rest till it’s fully cleaned and all set to get attached back to your keyboard.
Follow these steps to turn your old corsair keyboard into a whole new-looking keyboard. After cleaning, your keyboard will offer great performances for many coming years.
So, you see there are steps by which you can clean the corsair keyboard. So why spending money by heading to professional computer expert shops to clean your keyboard, when you are getting dust and grease-free keyboard easily by following the above-written method.
How to Clean Corsair K70 Keyboard? 2021 Step-By-Step Guide
Corsair k70 is a fully mechanical and gaming keyboard, and you get to see the CHERRY® MX Red critical switches on top of it. You get this keyboard with customizable backlighting technology, and it is built with premium materials that contoured FPS control keys. After some time, you get the keyboard keys oily and greasy and get to see the dust and junk under the keyboard’s keys.
Here you get the detailed and step by step guide about how to clean a greasy keyboard?
As you know k70 keyboard is made with premium materials, so the question that comes to your mind is that how to clean corsair k70 keyboard? It is a mechanical keyboard, so its keys get dirty and grimy pretty fast, so it is imperative to clean it. Here you get the step-by-step guide about cleaning the k70 keyboard and how to make it new and free from specks of dust and grimes.
Things you Need to Cleaning K70 Keyboard
Before cleaning, you need some essentials that will perform best to clean the k70 keyboard thoroughly, even under the RGB keys. Here are the things you need to do to clean the keyboard. Using them, you can clean the keyboard entirely without any hassle.
- Alcohol or Spirit
- Swaps or Earpicks
- Keycap Remover or Screw Driver
- Micro Fiber Cloth
- Wet Old Paper Towel
When you have all these things, the next step is to clean the k70 mechanical keyboard using these things, which will be explained in detail below.
How to Clean Corsair K70 Keyboard?
For your convenience and better understanding, we’ve put together a step-by-step guide below that will help you easily clean your keyboard.
As you know that inside this keyboard, you get to see the wrist rest feature that offers you to type, play, and work on it efficiently. First of all, you need to remove the wrist rest and clean it separately from the k70 keyboard. The detail guide about how to clean corsair k70 wrist rest is mentioned below.
Now you have to remove your keyboard keys, but you have to turn the keyboard upside down once to remove the big junks and odor. How do you take the keys off a Corsair K70? It is a frequently asked question from gamers and editors. You can use a screwdriver or keycap remover available on amazon to remove the k70 keyboard keys. Remove the keys you want using the keycap remover.
When you remove and clean the keyboard, the question comes to your mind: how to clean corsair k70 keyboard spacebar? All you have to do is use your four fingers to pull out the space bar after applying little force as it does not come with the spring mechanism.
Often due to the dust inside the keyboard keys you hear noises whenever you press them, here you will find a detailed guide that how to make mechanical keyboard quiet?
Pro Tip: Here, the thing you keep in mind before removing the keys that take a picture of the keyboard that makes it easy for you to apply keys again.
After removing the keys, you will find the keyboard with RGB switches, and on top of all the keyboard, you will see a pile of dirt and debris, etc. Therefore, you can use a brush to remove all the external dirt and debris from the keyboard.
Now it’s your turn to clean the k70 keyboard internally from all dirt and grime. Within this step, you will clean the keyboard using a wet paper towel as far as you can access it. On the other hand, you can use damp swabs and earpicks to clean keyboard areas that you can’t access. You can damp the swap with a wet paper towel to use it for cleaning purpose underneath the keyboard switches.
Pro Tip: Here the thing to keep in mind is that use the paper towel or swap and lightly rub on the keyboard to protect it from being damage.
By following all the steps above, you can clean 90% of the keyboard. Within the last step, you will have to put all the removed keys back on the keyboard after the cleaning process. For this purpose, clean each key using the microfiber cloth or paper towel. Finally, after cleaning all the k70 keyboard keys, re-place them on the keyboard with the picture’s help.
Pro Tip: You can also use alcohol on paper towels as they will play an essential role in efficiently protecting and cleaning the metal body of the k70 keyboard from all kinds of odors.
How to Clean Corsair Keyboard K70 Wrist Rest
In the first step, before cleaning the keyboard, you have to separate the wrist rest of it, which we will clean separately later. Therefore, you get the complete detail about how you can completely clean the wrist rest of the k70 mechanical keyboard.
- The first thing you need to do is sprinkle the dish soup over the wrist rest of the mechanical k70 keyboard
- After spraying, clean the top of the rest using a toothbrush that is old and applying pressure.
- You have to clean it until the wrist rest is entirely free of dirt and dust and finally join it with your k70 keyboard
After following all these steps, you can get your old corsair k70 keyboard into a new form and it will offer great performance for many years for you. Finally, with all the methods and steps mentioned above, you can get a dust-free keyboard and you can extent your k70 keyboard life by following these steps.
Hope you are familiar with how to clean corsair k70 keyboard? by following all the steps mentioned above. You don’t have to spend any money; you will have everything you need to clean it in your home. By following all these steps, you can clean your keyboard and get rid of sticky keys.
In the end, we hope that this guide proves to be helpful and informative for you. Also, you can quickly conclude how to clean the corsair k70 keyboard from inside and outside.
Is the Corsair K70 Water Resistant?
The corsair k70 keyboard comes with an aluminum body, but this keyboard is not waterproof after thorough research. This keyboard’s extraordinary and unique feature that sets it apart from others is its dedicated USB port on the back.
How do I Clean My Corsair K70 Keyboard?
All you have to do is use a micro fiber cloth or paper towel, damp it into the alcohol, and slightly rub on the keyboard keys and around the mechanical switches. You can remove the keys using a keycap remover or screwdriver, and after applying the cleaning process, you can get a new corsair k70 keyboard.
How Do I Fix Sticky Keyboard Keys?
To fix the sticky keyboard keys, you only need to damp the micro-fiber cloth into the rubbing alcohol and rub it around the mechanical keys and switches. After applying this process, until the dust and grime will remove, you get the sticky-free corsair k70 keyboard.
Is the Corsair K70 Good?
If you are a gamer, then the corsair k70 keyboard is especially for you as it comes with soft mechanical switches and RGB backlighting. Every RGB keys are macro-programmable, and it is pretty light to press.
How Do you Remove a Switch Without a Tool?
If you don’t have any tool or keycap remover to remove the switches, you don’t have to worry. There are many things available even in your home, and you can easily use them to remove the keyboard keys easily. The great thing to remove keyboard keys is the screwdriver that is available at every house.
Corsair keyboard clean
How to Clean a Mechanical Keyboard
Every keyboard, mechanical or not, should be cleaned on a regular basis. For one thing, obviously no one wants to work with a messy keyboard. For another thing, dust and grime can affect the functionality of your keyboard. A regular cleaning therefore supports a long lifespan of your keyboard.
There are many theories circulating about the best way of cleaning a keyboard. The suggestions range from “blow at it from every angle” to “put it into the dishwasher”. Not all of these methods can be recommended, for example, putting a keyboard into a dishwasher can easily mean its bitter end. So, how can you safely clean your keyboard? First, it is best to do an evaluation: Is the keyboard only a little bit dusty, then it probably will be sufficient to simply brush the dust off with a slightly damp microfiber cloth. Unplug the keyboard while cleaning it. If big amounts of dust have already accumulated below and between the keys, then cleaning the surfaces won’t be enough. A thorough clean-up of the keyboard is then due.
Best Way to Clean a Mechanical Keyboard
These instructions describe a safe and thorough way to clean a keyboard and its keycaps. They can be applied to virtually any keyboard, provided that its keycaps are detachable. That’s pretty much standard for a mechanical keyboard and also possible for some membrane keyboards.
- microfiber cloth
- bowl of water
- a few denture tablets
alternatives: dishwashing liquid, soap, laundry detergent or isopropyl alcohol
- some cotton swabs or foam swabs
- [optional] brush / duster / something similar to clean the bigger areas faster
- [optional] keycap puller to get the caps off easily
These items can be bought in any drug store and cost altogether less than 10 bucks.
Step 1: Unplug your keyboard
No matter how you clean your keyboard, the first step is always to disconnect it from your computer. Otherwise you might not only end up with random letters in the involuntarily sent email, but also risk to cause a short circuit.
Step 2: Take a picture of your keyboard
It’s a good idea to take a picture of your keyboard, so you can correctly reseat all keycaps at the end (they will be removed in the next step).
Step 3: Remove the keycaps
Remove all the keycaps to enable a thorough cleaning. The easiest way to get this done is by using a keycap puller, but you also can do it with your fingers. To remove a keycap, grasp it firmly and pull it straight up. You can wiggle a bit, but don’t try to overly force it into any other direction than up – or you might break some of the connectors. The big keys (space, enter, backspace, etc.) are often fixed with additional straps or wires, be extra careful with them. Or leave them on the board if you are not comfortable with removing them – you can clean those keys separately.
Step 4: Clean the keycaps
Put all the keycaps into a bowl with warm water and add 3-5 denture tablets. Yep, that’s right, denture tablets are perfect for cleaning keycaps. They remove grime, get rid of basically all bacteria and don’t leave a scratch. Let the keycaps soak for several hours, maybe stir the water a few times. After 5-6 hours, the optimal result is definitely reached. If you are in a hurry, you can also take them out earlier, usually an hour is enough to get them fairly clean. If you don’t have denture tablets, you can alternatively use water with a splash of dishwashing liquid, soap or laundry detergent.
Step 5: Clean the spaces
Since we removed all the keycaps, it is easy now to clean the spaces of your keyboard. If the last cleaning was long ago, there probably are lots of particles and dust on your keyboard. In such a case, you can divide the cleaning into four sub-steps:
- To get rid of the largest pieces, simply turn the keyboard around and shake it softly.
- Afterwards, you can use a brush / duster to go through the bigger spaces and remove whatever is left there. If you put the keyboard sideways, the force of gravity will come to your aid.
- Now clean all the areas you can reach with a slightly damp microfiber cloth. Usually water is entirely sufficient. Avoid getting liquids to the switches the best you can. If a stain can’t be removed by water alone, you can try using mild soap or glass cleaner. Be careful with cleansers, some of their chemicals can cause damage to your keyboard. If you are unsure, better test it on a small area first.
- The finishing touch is then done with the cotton / foam swabs. Moisten them a bit and clean all small spaces that are left.
Step 6: Clean case and cable
Don’t forget to also clean case and cable with a microfiber cloth. Afterwards, put the keyboard upside-down on a clean cloth / towel to let it dry. By doing so, you minimize the accumulation of dust around the exposed switches.
Step 7: Reseat the keycaps
After soaking the keycaps with the denture tablets, rinse them with water and also put them on a clean cloth / towel. Allow your keyboard and keycaps to dry completely. Be patient, it’s recommended to give them at least 48 hours. Finally, the last task is to reseat all keycaps, the picture you took in the beginning will help you to find the correct positions.
Step 8: Enjoy your clean keyboard!
Congratulations, you successfully cleaned your keyboard. Now it’s time to enjoy using it again!
Taking a Look at other Methods
As already mentioned in the beginning, the presented instructions are by no means the only way of cleaning a keyboard. Let’s take a look at some popular alternatives.
Cleaning a keyboard with a vacuum cleaner
Using a vacuum cleaner to get dust out of a keyboard seems natural. Moreover, there are quite some tutorials that advertise it as preferred option. Without a doubt, vacuuming can get your keyboard cleaned rather quickly. The problem is, that a vacuum cleaner builds up static electricity. As a consequence, an electrostatic discharge could occur on contact and might damage the keyboard. The probability of such an event is rather low – every day presumably thousands of keyboards are treated with a vacuum cleaner and problems are rather rare – but I still wouldn’t recommend doing it. Especially since a vacuum cleaner simply isn’t really required. Exception: If you own an anti-static vacuum cleaner, feel free to use it.
Conclusion: A safe cleaning is better done without a vacuum cleaner.
Other detergents / alcohol
There is a broad agreement, that denture cleanser is great for keyboard cleaning. But what about other detergents? A cloth moistened with a small amount of isopropyl / rubbing alcohol is in general okay and can be used to clean a keyboard. Don’t let the keycaps soak in it though. Furthermore, watch out for acetone, it is an ingredient of various cleansers and nail polish remover. It’s really aggressive on plastic and basically eats away your keycaps, as the chemical trial from Ripster has shown.
Conclusion: Ideally start with mild options like denture tablets, always check ingredients of detergents for acetone.
Cleaning a keyboard with canned air
It is easy to blow away dust from a keyboard with canned air. It even works without the need of removing the keycaps. However, you should know that you do not only blow dust away but also blow dust into the switches. That’s typically not an issue at first, but can cause problems if it’s done regularly. Moreover, canned air sometimes releases liquid particles which can cause damage to your keyboard.
Conclusion: Might be worth a shot for keyboards with non-removable keycaps, not recommended for all others though.
How do you clean you keyboard? Let us know and leave a comment with your favorite method.
Razer BlackWidow V3 / BlackWidow V3 Tenkeyless
Corsair K65 disassembly Water Damage cleaning
Pry each keycap off by grabbing the keycap with your fingers and pulling directly up.
Pulling the keycaps off at an angle may damage the keys or the switches on the keyboard.
A specialized tool to remove the keycaps will make this process a lot easier and faster, but is not required.
Peel back the Corsair logo with a knife.
Remove the logo, exposing another 9mm Phillips #0 screw.
Unscrew the now exposed 9mm Phillips #0 screw.
There should now be a total of 18 9mm Phillips #0 screws.
Carefully separate the bottom half of the keyboard from the top half of the keyboard.
Apply the rubbing alcohol to your cotton pad.
Wipe down the affected parts of the keyboard interior with the alcohol-soaked pad.
Allow the interior of the keyboard to dry for a few minutes before reassembling the keyboard.
- 2003 honda crv coolant type
- Henley last name origin
- Android 10 gsi
- Local 318 operating engineers
- Polaris ranger 900 belt
- 4x8 floor vent covers
- Bible project matthew poster
- Stainless steel square posts
How to properly clean a mechanical keyboard without damaging it
- You should lightly clean a mechanical keyboard with a small vacuum or a brush regularly.
- One of the advantages of a mechanical keyboard is that it's relatively easy to clean — you can remove and replace the keys with minimal effort to thoroughly cleanse the keyboard deck.
- If you spill liquid on your keyboard, unplug it to prevent electrical damage and then perform a light or thorough cleaning, depending on whether the liquid will leave a residue when it dries.
- Visit Business Insider's Tech Reference library for more stories.
In addition to typing accuracy and the more precise feel of a mechanical keyboard, one of its numerous advantages is the ease with which it can be cleaned. Using a common keycap puller (which resembles a small tong) you can remove the keys for a thorough cleaning. Here is the right way to keep your mechanical keyboard clean.
How to lightly clean a mechanical keyboard
You should regularly clean your keyboard to keep dirt, dust, pet hair, and food debris from building up on the deck of your keyboard between and under the keys, as well as on the palm rest and around the keys. It's a good idea to do this weekly, or whenever you see dirt accumulating.Related
The easiest and fastest way to keep the keyboard reasonably clean is with a small handheld keyboard vacuum. Ideally, the vacuum should have anti-static attachments, such as the narrow nozzle, that help you get between the keys.
If you don't have a vacuum, use a brush instead. You can find a wide variety of keyboard cleaning brushes on Amazon and elsewhere. The best options let you sweep between keys and have bristles long enough to reach all the way to the keyboard deck.
In addition to brushing or vacuuming, use a microfiber cloth to clean the entire keyboard, including the deck and wrist pad.
How to thoroughly clean a mechanical keyboard
You should perform a more thorough cleaning a few times a year to restore the keyboard to a like-new condition by cleaning under the keys and around the switches. To do this, you need a keycap puller to remove the keys from your keyboard. You should have received a puller tool with your mechanical keyboard, but if you've misplaced it, you can get a new one with many inexpensive computer tool kits or on its own for just a few dollars.
1. Take a photo of your keyboard before you begin so there's no doubt about exactly where each key goes when it's time to replace them.
2. Use the keycap puller to remove every key. Put them in a large bowl and fill it with warm, soapy water. Let them soak for several hours.
3. While the keys are soaking, use a vacuum and a dampened microfiber cloth to thoroughly remove all the debris from the keyboard deck. You can also use a cotton swab to remove dirt around the switches.
4. Dry the keyboard with a fresh, dry cloth.
5. After soaking for at least three to four hours, rinse and dry each key, then reattach it to the keyboard by pressing it onto the switch until it snaps into place.
Some types of keys tend to wear out — the keys take on a worn "shine" or the surface wipes away entirely. You can restore your keyboard by replacing the keys; check with your keyboard manufacturer for replacement keycaps.
How to clean a mechanical keyboard after a spill
If you accidentally spill a liquid on the keyboard, unplug it immediately from the computer's USB port. This will prevent electrical damage to the keyboard and the PC.
- If the only thing you spilled was water, you can turn the keyboard over to let the water drain. Then use a keycap puller to remove keys around the spill and thoroughly dry the keyboard with a cloth.
- If you spilled soda or a sugary beverage that will leave a residue when it's dry, completely remove all the keys and perform a thorough cleaning using the steps outlined above.
Related coverage from Tech Reference: