Sdr rsp1a

SDRplay RSP 1A Radio Spectrum Processor 1A 14 bit SDR
The SDRplay RSP1A is a major upgrade to the popular RSP1 and is a powerful wideband full featured 14-bit SDR which covers the RF spectrum from 1 kHz to 2 GHz.
Due to its exceptional combination of performance and price, the RSP1 has proved to be a very popular choice as an “entry level” SDR receiver. Since launching the RSP1, we have learned a great deal about what people are looking for in SDR receivers, and where possible, we have incorporated these improvements and new features into the RSP1A.
The RSP1A therefore delivers a significant number of additional features which result in benefits to amateur radio enthusiasts as well as significant benefits for the scientific, educational and industrial SDR community.
SDRplay has also worked with developers of the popular HDSDR, SDR-Console and Cubic SDR software packages to ensure compatibility. As with the RSP1, SDRplay provides multiplatform driver and API support which includes Windows, Linux, Mac, Android and Raspberry Pi 3. There is even a downloadable SD card image available for Raspberry Pi3 which includes Cubic SDR.
Radio Spectrum Processor 1A 14 bit SDR The SDRplay RSP1A is a major upgrade to the popular RSP1—it is a powerful wide-band full featured 14 bit SDR which covers the RF spectrum from 1 kHz to 2 GHz. All it needs is a PC and an antenna to provide excellent communications receiver functionality. Combined with the power of readily available SDR receiver software (including ‘SDRuno’ supplied by SDRplay) you can monitor up to 10 MHz of spectrum at a time. Documented API allows developers to create new demodulators or applications around the platform.

SDRplay RSP1A 1 kHz - 2000 MHz Wideband SDR Receiver

 Upgraded powerful wideband full-featured 14-bit SDR which covers the RF Spectrum from 1 kHz to 2 GHz.

● 1kHz–2000 MHz Continuous Coverage

                
●14-bit ADC Silicon Technology

    
● Up to 10 MHz Visible Bandwidth

● 11 High-Selectivity Built-in Front End Preselection Filters

● Windows Linux MAC & Raspberry Pi 3

● Free World-Class SDRuno Software

Building on the success of the popular RSP1, the RSP1A offers a significant number of additional features whilst maintaining exceptional performance and great value for money.

Main additional features of the RSP1A compared to the original RSP1:

• ADC resolution increased to 14-bit native for sample rates below 6 MHz, increasing to 16 bits with decimation

• Enhanced RF pre-selection (greater filter selectivity plus 4 additional sub-bands compared to the original RSP1) for reduced levels of spurious responses

• Improved LNA architecture with variable gain - the RSP1 had just a single gain step

• Improved intermodulation performance

• Performance extended to cover 1kHz to 2 GHz with a single antenna port

• Bias-T facility

• Improved frequency stability incorporating a 0.5ppm TCXO (software trimmable to 0.01ppm)

• Selectable broadcast AM/FM/DAB notch filters

• RF shielding within the robust plastic casing

Free Professional Software

When used together with SDRplay’s own SDRuno SDR Software, the RSP1A becomes a high performance SDR platform. Users can enjoy all modes of operation whilst monitoring up to 10 MHz of spectrum in real time.

• Highly integrated native support for the RSP1A

• Calibrated RF Power Meter with more than 100 dB of usable range

• Calibrated S-Meter including support for IARU S-Meter Standard

• The ability to save power (dBm) and SNR (dB) measurements over time, to a CSV file for future analysis

• The IQ output wave files can be accessed for 3rd party applications

SDRuno software allows you to operate from 1 up to 4 independent virtual SDR Receivers within the selected 10MHz bandwidth of the SDRplay hardware.(The actual number of Virtual SDR receivers is limited by the processing power of the PC in use.)

See SDRplay's Youtube demos

RSP1A is also compatible with HDSDR, SDR-Console and Cubic SDR software packages

SDRplay provides multiplatform driver and API support which includes Windows, Linux, Mac, Android and Raspberry Pi 3. There is even a downloadable SD card image available for Raspberry Pi3 which includes Cubic SDR.

Download SDRplay RSP1A Datasheet

Typical Receive Applications

● Broadcast and Utility Stations ● All Amateur bands 136 kHz – 23 cm ● VHF & UHF Airband ● ACARS and ADBS Aircraft Tracking
● Beacons-WSPR-Propagation ● VHF Shipping & AIS Ship Tracking ● Panoramic IF Receiver/Adapter ● TV & DAB Broadcast Support

Package Contents:   1 pcs SDRplay RSP1A with "Getting Started" information.

Note:  The SDRPlay RSP1A requires a standard USB-A plug to USB-B plug Cable.
This USB Cable is NOT supplied with the RSP1A as the majority of SDRPlay buyers will already have such a cable available.

The RSP1A is normally available from stock - we ship within 48 hours via Registered Post / Tracked Airmail.

RSP1A product is sold through SDR-KitsAuthorised Reseller for Japan:  ICAS Enterprises  www.ICAS.to  

The RSP1A is our popular entry-level receiver—it is a powerful wideband full featured 14 bit SDR and perfect as an all round general coverage communications receiver plus much much more.  

RSP1A Pricing – $109 (£86 excluding tax) plus shipping – INCLUDES SDRuno!

The RSP1A covers the complete radio spectrum from 1kHz (VLF) to 2GHz (Microwaves) with up to a massive 10MHz visible bandwidth and the companion SDRuno software has all the popular ham bands and shortwave broadcast bands as “presets” for instant set-up. 

To check compatibility with your choice of computer hardware, operating system and SDR application software, go to https://www.sdrplay.com/downloads/

Finally, beware the many scams and fake devices out there – click here for simple rules for buying genuine SDRplay products safely from trusted sellers:  https://www.sdrplay.com/fakealert/

RSP1A^® is a registered trademark belonging to SDRplay Ltd