Canon printer green light flashing

Canon printer green light flashing DEFAULT

How to Repair a Canon Printer (Blinking Light)

Sinopku    January 08,    Canon , Tutorial    Comment   

How to Repair a Canon Printer (Blinking Light)- Canon printer is a favorite printer that is the most widely used by people at this time, in addition to having a very cheap price, this printer also has a very good durability and easy to maintain. This printer belongs to the type of printer most commonly used by users. If you are a loyal user of Canon printers, of course you are familiar with the problems with this printer and how to overcome them.


Common problems that occur in Canon printers are Not Responding, printer ink that does not come out, and the indicator light that continues to blink. The flashing lights on this Canon printer indicate mild to severe abnormalities. and here is how to fix a Canon printer when the indicator lights continue to flash.

1. The indicator flashes when the printer is turned on.

For this problem, it usually happens when your previous printer turns off suddenly. For example when your printer is cut off electric power suddenly. If your printer's indicator lights continue to blink when just turned on, follow the steps below:
  • First unplug the power cable on your printer.
  • Press the power button on your printer, able to replace the Power cable.
  • Because of this treatment, the power indicator on your printer will turn yellow.
  • Then release the power button that you press when you finish installing the power switch.
  • And to restart your printer, press the power button on your printer again.

2. The blinking indicator is related to ink.


The indicator on the Canon printer sometimes flashes when you have just filled ink. Or it could be when your printer has run out of ink. If your printer is flashing because of ink, of course not because it is damaged. Because the printer will automatically provide information if you have problems with ink. If you experience this, the following steps to overcome the indicator that blinks due to ink:

  • If the indicator blinks, you can press "Resume", about 1 to 2 minutes.
  • Then open the lid of your Canon printer cover.
  • Remove the cartridge, then put it back.
  • Then turn off your printer first, then turn it back on. Then your printer will be back to normal.

3. The indicator blinks 7 times.


If your printer's indicator blinks 7 times with the alternation of orange and green, that means your Ink Pad is full. How to fix this is by cleaning the ink absorber at the bottom of the printer. But if you don't clean it, you can replace the foam.

4. The indicator blinks 6 times.


The printer blinks 5 times in orange and 1 time in green, this indicates that the black cartridge in your printer is damaged. The way to overcome them is by checking back the black cartridge is really in a damaged condition. If the cartridge is damaged, then the solution is to replace the printer cartridge so you can use your printer again.

5. The indicator blinks 5 times.


If your printer indicator blinks 4 times in orange and 1 time in green, the error lies in full waste ink. The solution is to reset your printer like step number 2 above. This is just a warning from the printer to tell you to check the state of the ink, whether it is in full or has run out.

6. The indicator blinks 4 times.

If the indicator on your printer blinks 3 times in orange and 1 time in green, it means that there is damage to your printer hardware. If by resetting your printer using the "resume" button does not solve it, then the solution is you have to bring your printer to the service center.

").addClass("theiaStickySidebar").append(a.sidebar.children()),a.sidebar.append(a.stickySidebar)),a.marginTop=parseInt(a.sidebar.css("margin-top")),a.marginBottom=parseInt(a.sidebar.css("margin-bottom")),a.paddingTop=parseInt(a.sidebar.css("padding-top")),a.paddingBottom=parseInt(a.sidebar.css("padding-bottom"));var n=a.stickySidebar.offset().top,d=a.stickySidebar.outerHeight();a.stickySidebar.css("padding-top",1),a.stickySidebar.css("padding-bottom",1),n-=a.stickySidebar.offset().top,d=a.stickySidebar.outerHeight()-d-n,0==n?(a.stickySidebar.css("padding-top",0),a.stickySidebarPaddingTop=0):a.stickySidebarPaddingTop=1,0==d?(a.stickySidebar.css("padding-bottom",0),a.stickySidebarPaddingBottom=0):a.stickySidebarPaddingBottom=1,a.previousScrollTop=null,a.fixedScrollTop=0,o(),a.onScroll=function(a){if(a.stickySidebar.is(":visible")){if(i("body").width()

Sours: https://www.all-printerdrivers.com//01/how-to-repair-canon-printer-blinking.html

It flashed 11 times what does that mean??

**

2 flashes

Meaning: the printer is out of paper / No paper.

Solution: Reload paper in the rear tray and press the Resume / Cancel button.

***

3 flashes

Meaning: the paper exit tray is closed / Paper jam.

Solution: the paper is jammed. Remove the jammed paper, replace the paper correctly in the printer, and then press the Resume / Cancel button.

****

4 flashes

Meaning: the tank cartridge is not correctly installed or has run out.

Solution: open the front panel, and then install the cartridge correctly.
Remove the cartridge, then put it back. Or install another cartridge if it is not recognized.
The cartridge chip may be defective.

*****

5 flashes

Meaning: the print head is not installed or defective.

Solution: The print head is the block in which you install the reservoir cartridges for your printer.
An example of a 5-cartridge printhead below without the cartridges.

5 cartridges printhead

By lifting the lever on the left, you can then remove the print head.
With a soft cloth and a little alcohol, clean part N ° 2 to remove any dust on the electrical contacts.

Printer cartridge diagram

After reinstalling the print head and cartridges, if the fault persists, the only solution is to change the print head or change the printer.
As an indication, the value of a Canon inkjet printhead is around £65 ex vat. Contact your local Cartridge World store for a quote.

******

6 flashes

Meaning: the cover is open.

Solution: check that the hood is properly closed, that there is no gap or play, even slight.

*******

7 flashes

Meaning: the tank cartridge is not correctly installed.

Solution: remove the cartridge, then put it back. Or install another cartridge if it is not recognized.
The cartridge chip may be defective.

********

8 flashes

Meaning: waste ink tank is almost full.

If the following message appears, "End of life items or components, contact Canon Support" or "Waste ink tank is almost full or full".

In this case, the manufacturer limits the life of the printer with a maximum number of pages to print. This, even if the printer worked well and printed correctly just before the message appeared.
The solution consists in carrying out a manipulation to reset this used ink counter to zero.

Depending on your printer, there are different ways to reset the used ink counter.
Note: The ink pad also physically exists in the printer under the print head, and there is a high probability that this pad is saturated with ink.
Also, the printer is not waterproof, we advise you not to put it on a piece of furniture which could be damaged by ink running under the printer.

The "resume" button is a circle with an inner triangle pointing down:

Resume / Power On button

CANON "S" SERIES PRINTERS:

  1. Reset the counter for the ink tank.

  2. Turn off the printer.

  3. Press and hold the "resume" button, then do the same with the "power" button.

  4. Release the "resume" button, then press twice on the same button, still holding the "power" button.

  5. Release everything and wait until the green light stops flashing: the printer enters "service mode".

  6. Press the "resume" button 4 times. The counter is then reset to 0.

CANON S PRINTER:

  1. Take out the cartridges.

  2. Disconnect the power cable.

  3. Close the front cover.

  4. Press the "Resume / reset" button and at the same time reconnect the cable.

  5. Release the button.

  6. Press the button again within 5 seconds and release it.

  7. Press the button again for two seconds and release it.

  8. Press the button again for two seconds and release it.

  9. Disconnect the power cable to validate.

  10. Reconnect the cable.

CANON I, I, I, I

  1. Turn off the printer and disconnect the usb cable.

  2. Press and hold the "Power" button and turn the printer back on.

  3. The LED must be green.

  4. Press once on "resume", the light turns orange.

  5. Press "resume" once again and the light is green.

  6. Release the "Power" button.

  7. Reconnect the power cable.

  8. Open the printer configuration software and select the USB port.

  9. Choose "Set detination 1" and reset to 1 must be done.

CANON ID:

  1. Turn off the printer.

  2. Press on "Resume" then, without releasing, on "Power".

  3. Leave "Power" pressed and release "Resume".

  4. Press "Resume" twice and release the two buttons.

  5. The green lights flash for a moment and then remain steady.

  6. Then press "Resume" 4 times.

  7. Press "Power" to turn off; if the printer does not turn off, press it again.

CANON PIXMA IP

  1. Disconnect the USB and power cable.

  2. Open the cover and press "Power".

  3. Reconnect the power cable.

  4. Close the cover and release the "Power" button.

  5. Download and install GeneralTool software.

  6. Reconnect the cable.

  7. Open GeneralTool.

  8. Press ip

  9. Set Destination 1.

  10. Select "Clear waste ink counter - Main".

  11. Select "Clear waste ink counter - Plate".

CANON I, I, S, IP

  1. The printer must be turned off.

  2. Press "Resume" then "Power".

  3. Release "Resume".

  4. Press twice on "Resume", then release "Power".

  5. Let the green light blink until the printer is ready.

  6. Press 3 times on "Resume" and then on "Power to validate the reset to 0.

CANON S

  1. The printer is turned off.

  2. Press "Resume and then" Power "until it sounds" Beep ".

  3. Leave power pressed and release "Resume".

  4. Press "Resume" twice.

  5. Release the "Power" button.

  6. When the lights stabilize, press "Resume" 3 times. The light turns orange.

  7. Press "Power" to confirm.

CANON BJC SERIE:

  1. Take out the cartridge.

  2. Disconnect the power cable.

  3. Press "Resume".

  4. Release "Resume" after reconnecting the power cable.

  5. After 5 seconds press once on "Resume".

  6. Press "Resume" for 2 seconds and release.

  7. Again, press "Resume" for 2 seconds and release.

  8. Disconnect the power cable to validate.

CANON BJC, BJC SERIE:

  1. Take out the cartridge.

  2. Disconnect the power cable.

  3. Close the front access panel.

  4. Press and hold the "Resume / Reset" button and reconnect the power cable.

  5. Release "Resume / Reset".

  6. Press "Resume / Reset" once after 5 seconds.

  7. Press "Resume / Reset" for 2 seconds and release.

  8. Again, press "Resume" for 2 seconds and release.

  9. Disconnect the power cable to validate.

CANON BJC, BJC, BJC, BJC, BJC, BJC, BJC, BJC, BJC, BJC, BJC

  1. Disconnect the power cable.

  2. Press and hold the "Power" and "Resume" buttons.

  3. Reconnect the power cable.

  4. Let go of the buttons.

  5. Open the printer front panel.

  6. Press and hold the "Cartridge" and "Resume" buttons.

  7. Press "Power".

  8. Release all buttons after the beeps.

  9. Press once on "Cartridge".

  10. Press "Resume".

CANON BJC

  1. Turn off the printer.

  2. Press on "Resume" then on "Power", the lights will start to flash.

  3. Then press "Resume" twice and wait until a beep indicates the service mode.

  4. When the lights remain green, press "Resume" 4 times.

  5. Press "Power" to confirm.

CANON BJC

  1. Turn off the printer.

  2. Press and hold on "Resume" then on "Power", the light will start to flash.

  3. Then press "Resume" twice and wait for the beep.

  4. When the lights stay green, press "Resume" 4 times.

  5. Press "Power" to confirm.

CANON BJC, BJC, BJC, BJC, S, S, F, F, F, BJC, BJC, BJC, BJ-F, I

  1. Turn off the printer.

  2. Press "Resume" and, without releasing the button, then press "Power" until there is a beep or the green LED lights up.

  3. Release "Resume" while holding down "Power".

  4. Press Resume twice and release the two buttons.

  5. When the lights stop blinking, press "Resume" 3 times. The indicator should be orange.

  6. Press "Power" to confirm.

CANON BJC

  1. Turn off the printer.

  2. Press, without releasing, on "Resume" and then on "Power".

  3. Drop "Resume" but leave "Power" pressed.

  4. Press Resume twice and release the buttons.

  5. When the lights stop blinking, press "Resume" 4 times. The indicator should be green.

  6. Press "Resume once.

  7. Press "Power" to confirm.

CANON BJC, BJC, BJC, BJC, M40, M

  1. Disconnect the power cable.

  2. Press "Power" and "Resume".

  3. Reconnect the cable.

  4. Release the buttons once the printer has restarted.

  5. Press "Cartridge" and "Resume".

  6. Press "Power".

  7. Release all buttons after the beeps.

  8. Press "Cartridge" 16 times.

  9. Press "Resume".

  10. Disconnect the power cable.

CANON BJ F, F, F, F, S, S, S, S

  1. Turn off the printer.

  2. Press and hold on "Resume" then do the same with "Power".

  3. Release "Resume" and press 2 times on "Resume" still keeping "Power" pressed.

  4. Relax everything.

  5. Press 4 times on "Resume".

  6. Press "Power" to confirm.

  7. Press "Power" again to turn off the printer.

CANON S, S, I, I, I, I, I, I, I, PIXMA IP, PIXMA IP

  1. Turn off the printer.

  2. Press "Resume" then "Power".

  3. Release "Resume". Press twice on "Resume" and release the two buttons.

  4. When the lights stop flashing press 4 times "Resume".

  5. Press "Power" so that the printer turns off. If not, press again.

CANON S, S, S, S

  1. Turn off the printer.

  2. Press and hold "Resume", then press and hold "Power".

  3. Release "Resume" and press twice on it.

  4. The printer is in service mode.

  5. Release the "Power" button.

  6. Press 4 times on "Resume".

  7. Press "Power" to confirm and again "Power" to restart the printer.

CANON S

  1. Turn off the printer.

  2. Press and hold "Resume" then "Power".

  3. Release "Resume".

  4. Press twice on "Resume" and release the two buttons.

  5. When the lights stop flashing press 4 times "Resume".

  6. Press "Power" to turn off the printer.

CANON PIXMA IP, IP, IP, IP, IP

  1. Turn off the printer.

  2. Press "Resume / Cancel" and at the same time press "Power".

  3. Release "Resume / Cancel" and press twice on "Resume / Cancel".

  4. Release the two buttons.

  5. Press 4 times on "Resume".

  6. Press "Power" to confirm.

CANON MPC, MPC

  1. Press: Menu, Copy, Scan, Copy, Copy.

  2. Select Test Mode.

  3. Select 8 - "Printer test in Test Mode".

  4. Select 3 - "EEPROM CLEAR".

  5. Select 0 - "INK COUNT".

  6. Press the "Set" key.

  7. Press the "Stop / Reset" button then press "On / Off".

CANON PIXMA MP

  1. Enter "Service Mode" by successively pressing the Menu-Scan-Copy-Scan keys.

  2. Go to "NVRAM" with the arrows then press "OK".

  3. Go to "CMY ink level" with the arrows then press "OK".

  4. Select "1" then press "OK".

  5. Go to "K ink level" with the arrows then press "OK".

  6. Select "1" then press "OK".

  7. Press "Reset" (triangle in a red circle).

  8. If the procedure does not work, apply the one below from the MP

CANON PIXMA MP

  1. Turn on the printer.

  2. Press: Menu -> Scan -> Copy -> Scan.

  3. "SERVICE mode": go to "NVRAM ACCESS".

  4. Set "ABS-M LEVEL" to 0.

  5. Set "ABS-P LEVEL" to 0.

  6. Press "STOP" to exit.

CANON S

  1. Turn off the printer.

  2. Press and hold "Resume" then "Power".

  3. Release "Resume".

  4. Press twice on "Resume" and release the two buttons.

  5. When the lights stop flashing press 4 times "Resume".

  6. Press "Power" to turn off the printer.

CANON PIXMA MP, MP

  1. Turn off the printer.

  2. Press "Power" and at the same time press "Stop / Reset".

  3. Release "Stop / Reset" and press twice on it.

  4. Release the two buttons.

  5. When the "on / off" lights are green, press "Stop / Reset" 4 times.

  6. Turn off the printer and turn on again.

CANON PIXMA MP

  1. Turn off the printer.

  2. Press "Power" and at the same time press "Stop / Reset".

  3. Release "Stop / Reset" and press twice on it.

  4. Release the two buttons.

  5. Wait 20 to 30 seconds until the screen marks "Canon Idle".

  6. Press "Stop / Reset" 4 times.

  7. Press twice on "Power".

  8. Turn the printer off and on.

CANON PIXMA MP

  1. Turn off the printer.

  2. Press on "Resume / Cancel" (red triangle in the circle) and at the same time on "Power"; the green light comes on.

  3. Release "Resume / Cancel" while keeping "Power" pressed.

  4. Press "Resume / Cancel" twice and release the two buttons.

  5. When the green button lights up, press "Resume / Cancel" 4 times.

  6. Turn off the printer and turn on again.

CANON IP, IP, IP

  1. Download this little program: GeneralTool.

  2. Unzip the file.

  3. Launch "GeneralTool.exe".

  4. Select the correct USB port for the printer.

  5. Click on "Lock release" then select the model in "Set destination".

  6. In "Clear waste ink counter", select "Main" to reset the ink counter.

CANON MP, MP, MP, MP, MPC

  1. Enter service mode, by pressing "menu," copy "and" # ".

  2. Select "Test mode".

  3. Select 8 - "Printer test in test mode".

  4. Select 3 - "EEPROM clear".

  5. Select 0 - "Ink count".

  6. Press the "OK" key.

  7. Press the "Stop / Reset" button and then "On / Off"

CANON SMARTBASE MP, MP, MP

  1. Enter Service Mode: to do this press the black button with a star, followed by, "scan", "copy", "scan".

  2. Select "Test mode" by pressing the right arrow 13 times.

  3. Select 8: "Printer Test".

  4. It will be marked "- +" press the right arrow once to have "- +" press "OK".

  5. Select 0: "Ink Count".

  6. Press "OK".

  7. This should revert to "8: Printer Test - +".

  8. Press the "Stop / Reset" button to return to step 3.

  9. Press the "On / Off" button.

CANON MP, MP, MP, MP, MP, MP, MP, MP, MP, MP, MP, MP, MP, MP, MP, MP, MP, MP, MP

  1. Turn off the printer.

  2. Press the "Resume" button (red circle in the triangle), and, without releasing, press "Power".

  3. Release the "Resume" button.

  4. Without releasing the "Power" button, press "Resume" twice and release the two buttons.

  5. Press "Resume" four times. Press power to confirm.

  6. Press "Power" again to restart the printer.

CANON PIXMA MP

  1. Turn off the printer.

  2. Press buttons N ° 1 + 2 + 3 and 4 without releasing them.

  3. Leave to press for 10 seconds.

  4. Release the "On / Off" button (No. 4), always letting the others press.

  5. After a few seconds, when the printer turns on, release the three buttons.

CANON PIXMA MP, MP, MP

  1. Press successively on: Menu, Scan, Copy, Scan.

  2. Select "Test mode".

  3. Select 8 "Etc .."

  4. Select 4 "EEPROM CLEAR".

  5. Select 1 "Ink Count".

  6. Turn off the printer and turn on again.

CANON IP, IP

  1. Turn off the printer.

  2. Press and hold "Resume" then press "Power".

  3. Leave "Power" pressed and release "Resume".

  4. Press twice on "Resume" and release the two buttons; wait until the green light stops flashing.

  5. Press "Resume" 4 times and press "Power" to restart the printer.

CANON MX

  1. Turn off the printer.

  2. Press and hold the "Stop / Reset" button, then press and hold the "On / Off" button

  3. Keeping "On / Off" pressed, release "Stop / Reset", then press twice on it.

  4. Release the two buttons.

  5. When the Power LED is green, press "Stop / Reset" 4 times.

  6. Press "On / Off", press "Stop / Reset" twice.

  7. Press "On / Off" again to turn off the printer.

*********

9 flashes

Meaning: The printer has no response from the digital camera.

Solution: problem not related to cartridges, see your manual.

**********

10 flashes

Meaning: can not print on both sides.

Solution: problem not related to cartridges, see your manual.

***********

11 flashes

Meaning: Automatic alignment of the print head has failed.

Solution: press the "resume / cancel" button to restart the printer.

*************

13 flashes

Meaning: The ink level of the cartridge cannot be detected.

Solution: the light should be solid red to indicate that the tank cartridge is recognized. If not, remove the cartridge, then put it back. Or install another cartridge if it is not recognized.

**************

14 flashes

Meaning: the tank cartridge cannot be recognized.

Solution: remove the cartridge, then put it back. Or install another cartridge if it is not recognized.
The cartridge chip may be defective.

***************

15 flashes

Meaning: the tank cartridge cannot be recognized.

Solution: remove the cartridge, then put it back. Or install another cartridge if it is not recognized.
The cartridge chip may be defective.

****************

16 flashes

Meaning: the cartridge has run out.

Solution: if the light corresponding to the cartridge is not solid red, then it is probably necessary to replace the cartridge.

Sours: https://www.cartridgeworld.co.uk/the-meaning-of-canon-inkjet-printer-orange-light-flashes
  1. Blue moroccan backsplash tile
  2. Blue mountain metal works
  3. Minecraft pvp reddit
  4. Steel drum furniture
  5. Wii isos google drive

Alarm Lamp Flashes Orange

Two flashes:Printer is out of paper/Paper does not feed

Reload the paper in the Rear Tray, Cassette, or Manual Feed Slot of the Front Tray and press the RESUME/CANCEL button.

NOTE

When printing on the plain paper, load into the Cassette or Manual Feed Slot of the Front Tray. Refer to [ Loading Paper ] for details about how to load the paper.


Three flashes:Front Tray is closed/Paper is loaded into the Manual Feed Slot of the Front Tray/Paper jams

If the Front Tray is closed, open it. The printer resumes printing.

If the paper is loaded on the Manual Feed Slot of the Front Tray when printing from the Cassette, remove the paper from the Front Tray and press the RESUME/CANCEL button.

If opening the Front Tray does not resolve the problem, if the Front Tray was open to begin with, or if removing the paper from the Front Tray does not resolve the problem, the paper may be jammed. Remove the jammed paper, reload paper properly in the printer, then press the RESUME/CANCEL button on the printer.

Paper Jams

See[Paper Jams]


Four flashes:Ink tank is not installed properly/The clear ink tank is not installed/Ink may have run out

  • If the lamp on the ink tank is not lit, the ink tank may not be installed properly. Install an appropriate ink tank.
  • The clear ink tank is empty.You are recommended to replace the clear ink tank with a new one.

-> [ Replacing an Ink Tank ]

If printing is in progress and you want to continue printing, press the printer's RESUME/CANCEL button. Then printing can continue. Replacing the clear ink tank is recommended after the printing.

If the clear ink runs out, you will not be able to print on plain paper.

  • Ink may have run out (The lamp on the ink tank flashes). If printing is in progress, you are recommended to stop printing, replace the ink tank, and then print again.

-> [ Replacing an Ink Tank ]

If printing is in progress and you want to continue printing, press the printer's RESUME/CANCEL button. Then printing can continue. Replacing the ink tank is recommended after the printing. The printer may be damaged if printing is continued under the ink out condition.


Five flashes:Print Head is not installed/Print Head is defective

Follow the directions given in your setup manual to install the Print Head.

If the Print Head is already installed, remove the Print Head once and then reinstall it.

If the error is still not resolved, the Print Head may be damaged. Contact your Canon service representative.


Six flashes:The paper is not loaded on the Manual Feed Slot of the Front Tray properly

Reload the paper on the Manual Feed Slot of the Front Tray properly, then press the RESUME/CANCEL button.


Seven Flashes:Ink tank is not installed in the correct position

  • Some ink tanks are not installed in the correct position. (The lamps on the ink tanks flash.)
  • More than one ink tanks of the same color are installed. (The lamps on the ink tanks flash.)

Confirm that the ink tanks are installed in the appropriate positions.

Replacing an Ink Tank

This section describes the procedure to replace an ink tank if ink runs out while printing is in progress.

See[Replacing an Ink Tank ]


Eight flashes:Ink absorber is almost full

The ink absorber is almost full.

Press the printer's RESUME/CANCEL button to continue printing. Contact the service center.


Ten flashes:The Cassette is not installed properly/Cannot perform duplex printing

  • When loading from the Cassette, install the Cassette properly and press the RESUME/CANCEL button.
  • When performing automatic duplex printing, the size of paper may not be compatible with automatic duplex printing. The sizes of media suitable for auto duplex printing are A3, Regal, 11" x 17" (Tabloid), B4, A4, Letter, 10" x 12", 8" x 10", B5, and A5". Make sure that the size of the paper loaded in the printer is correct. Pressing the RESUME/CANCEL button will eject the paper and restart printing from the front side of the next paper. The reverse side of the ejected sheet will not be printed.

Eleven flashes:Automatic Print Head alignment failed/The Paper Feed Roller is dirty/The Page Size setting does not match the size of the paper loaded in the printer

When performing Automatic Print Head Alignment:

  • Print Head nozzles are clogged. Press the RESUME/CANCEL button to dismiss the error, and print the nozzle check pattern to check the status of the Print Head. -> [ Printing the Nozzle Check Pattern ]
  • Paper of size other than A4 or Letter is loaded in the Rear Tray. Press the RESUME/CANCEL button to dismiss the error, then load two sheets of A4/Letter-sized plain paper in the Cassette.

For Automatic Print Head Alignment, always load paper on the Cassette.

  • The Paper Output Slot is exposed to strong light. Press the RESUME/CANCEL button to dismiss the error, and then adjust your operating environment and/or the position of the printer so that the Paper Output Slot is not exposed directly to strong light.

After carrying out the above measures, if the problem continues after aligning the Print Head again, press the RESUME/CANCEL button to dismiss the error, and then perform Manual Print Head Alignment.

-> [ Aligning the Print Head ]

When printing from the Cassette:

When a sheet cleaning operation is necessary, the Alarm amp flashes 11 times before printing.

Press the RESUME/CANCEL button on the printer to start printing.

We recommend that you perform sheet cleaning after printing finishes, as failure to perform sheet cleaning may affect the print quality.

-> [ Cleaning the Transport Roller (Sheet Cleaning) ]

When printing the nozzle check pattern or performing Manual Print Head Alignment:

Other than A4/Letter-sized paper is loaded.

Press the RESUME/CANCEL button on the printer to clear the error, and load A4/Letter-sized plain paper in the Cassette. Then try performing again.

When performing an ordinary print job:

  • Press the RESUME/CANCEL button on the printer to clear the error. Then check the Page Size setting in the Page Setup sheet (Windows) or the Page Setup dialog box (Macintosh) in the printer driver and load paper that is the same size as the setting and try printing again.
  • If this error occurs even when the paper loaded in the printer is the same as the setting, set the printer driver not to detect the width of the paper.

* Select the Detect paper width check box again once printing is complete, and then click Send.

The Custom Settings in the Maintenance sheet, clear the Detect paper width check box, and then click Send.

In the Canon IJ Printer Utility, select Custom Settings in the pop-up menu, clear the Detect paper width check box, and then click Send.


Twelve flashes:The ink tank has been replaced during printing

Press the RESUME/CANCEL button on the printer to clear the error, then resume printing.


Fourteen Flashes:Ink tank cannot be recognized

The ink tank is not compatible with this printer. (The lamp on the ink tank is off.)

Install an appropriate ink tank.

Replacing an Ink Tank

This section describes the procedure to replace an ink tank if ink runs out while printing is in progress.

See[Replacing an Ink Tank ]


Fifteen Flashes:Ink tank cannot be recognized

An Ink tank error has occurred. (The lamp on the ink tank is off.)

Replace the ink tank.

Replacing an Ink Tank

This section describes the procedure to replace an ink tank if ink runs out while printing is in progress.

See[Replacing an Ink Tank ]


Sixteen flashes:The clear ink tank is not installed/The clear ink has run out

  • The clear ink tank is not installed. Install the clear ink tank properly.

-> [ Replacing an Ink Tank ]

Print quality will deteriorate considerably and the printer may be damaged if printing on plain paper is continued under the clear ink out condition. For this reason, you cannot print on plain paper until the clear ink tank is installed.

  • The clear ink has run out. Replace the clear ink tank with a new one.

-> [ Replacing an Ink Tank ]

Print quality will deteriorate considerably and the printer may be damaged if printing on plain paper is continued under the clear ink out condition. For this reason, you cannot print on plain paper until the clear ink tank is replaced with a new one.

NOTE

  • It is possible to print on photo paper, or any type of paper other than plain paper, loaded in the Rear Tray, even if clear ink has run out.

Seventeen flashes:Ink has run out/Printer detected ink out condition

Ink has run out. (The lamp on the ink tank flashes.)

If printing is in progress, stop printing, replace the ink tank, and then print again. Printing under the current condition may damage the printer.

-> [ Replacing an Ink Tank ]

To continue printing, you need to release the function for detecting the remaining ink level. Press and hold the printer's RESUME/CANCEL button for at least 5 seconds, and then release it. This operation releases the function for detecting the remaining level of the above ink, and releasing the function is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.

NOTE

  • If the function for detecting the remaining ink level is disabled, the remaining ink level is not displayed correctly on the printer status monitor (Windows) and Canon IJ Printer Utility (Macintosh).

  • For PBK ink (black ink) or Y/M/C ink (color ink):

Printer detected ink out condition (The lamp on the ink tank flashes).

If printing is in progress, stop printing, replace the ink tank, and then print again.

-> [ Replacing an Ink Tank ]

To avoid printing troubles such as the mixing of inks, this printer is designed to stop printing by flashing the Alarm lamp orange seventeen times when the remaining ink level in an ink tank goes under the amount of ink required to maintain both printer and print quality.


Eighteen flashes:Printer detected ink out condition

Printer detected ink out condition (The lamp on the ink tank flashes).

Stop printing, replace the ink tank, and then print again.

-> [ Replacing an Ink Tank ]

An ink tank that was once empty is installed.

Printing under the ink out condition may damage the printer.

If you want to continue printing, you need to release the function for detecting the remaining ink level. To release this function, press and hold the printer's RESUME/CANCEL button for at least 5 seconds, and then release it.*

* With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing or refilling of ink.

NOTE

  • If the function for detecting the remaining ink level is disabled, the remaining ink level is not displayed correctly on the printer status monitor (Windows) and Canon IJ Printer Utility (Macintosh).

  • For PBK ink (black ink) or Y/M/C ink (color ink):

Printer detected ink out condition (The lamp on the ink tank flashes).

Stop printing, replace the ink tank, and then print again. Be sure to replace the empty ink tank before resuming printing.

-> [ Replacing an Ink Tank ]

An ink tank that was once empty is installed.

Printing under the ink out condition may cause the printing trouble such as the mixing of inks, or a printer malfunction.

If you want to continue printing, you need to release the function for detecting the remaining ink level. To release this function, press and hold the printer's RESUME/CANCEL button for at least 5 seconds, and then release it.*

* With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing or refilling of ink.

NOTE

  • If the function for detecting the remaining ink level is disabled, the remaining ink level is not displayed correctly on the printer status monitor (Windows) and Canon IJ Printer Utility (Macintosh).

Sours: https://in.canon/en/support/
Canon PIXMA Light Blinking Error Problem \

Models related to this article

Number of Flashes / Cause

Action

Two (2) flashes:

Printer is out of paper. / Paper does not feed.

Reload paper in the Rear Tray or Cassette and press the RESUME / CANCEL button on the printer.

Three (3) flashes:

Paper Output Tray is closed. / Paper jam.

  • If the Paper Output Tray is closed, open it. The printer resumes printing.

  • If opening the Paper Output Tray does not resolve the problem, or if the tray was open to begin with, the paper may be jammed. Remove the jammed paper, reload paper properly in the printer, then press the RESUME/CANCEL button on the printer.

Four (4) flashes:

Ink tank is not installed properly. / Ink may have run out.

  • If the lamp on the ink tank is not lit, the ink tank may not be installed properly.
    Install an appropriate ink tank.

  • If the lamp on the ink tank is flashing, ink may have run out.
    Replacing the ink tank is recommended.

  • If printing is in progress and you want to continue printing, press the RESUME / CANCEL button with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The printer may be damaged if printing is continued under the ink out condition.

Note If multiple ink lamps are flashing, refer to Routine Maintenance and confirm the status of each ink tank.

Five (5) flashes:

Print Head is not installed. / Print Head is defective.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Seven (7) Flashes:

Ink tank is not installed in the correct position.

  • Some ink tanks are not installed in the correct position. (The lamps on the ink tanks flash.)

  • More than one ink tank of the same color are installed. (The lamps on the ink tanks flash.)

  • Confirm that the ink tanks are installed in the appropriate positions.

Note Refer to Routine Maintenance and confirm the ink tanks are installed accurately.

Eight (8) flashes:

Ink absorber is almost full.

  • The ink absorber is becoming full.

  • The printer has a built-in ink absorber to hold the ink used during Print Head Cleaning.

  • Press the RESUME / CANCEL button on the printer to cancel the error so you can continue printing.

Nine (9) flashes:

The printer has not received a response from the digital camera. The digital camera or digital video camcorder connected is not compatible with this printer.

  • Check the device connected to the printer. Printing photos directly is possible only with a PictBridge compliant device.

  • A communication time out occurs if an operation takes too long or if it takes too much time to send data. This may cancel printing. In such cases, disconnect and reconnect the USB cable.

  • If the error is still not resolved, check if you can print another photograph.

Note When printing from a PictBridge compliant device, depending on the model or brand of your device, you may have to select a PictBridge print mode on the device before connecting it to the printer. You may also have to turn on your device or select Play mode manually after connecting the device to the printer. Refer to its instruction manual and perform the necessary operations before connecting your device.

Thirteen (13) flashes:

Ink level cannot be detected.

  • The remaining ink level cannot be correctly detected. (The lamp on the ink tank flashes.)

  • Replace the ink tank and close the Top Cover.

  • Printing with an ink tank that was once empty may damage the printer.

  • If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the RESUME / CANCEL button for at least 5 seconds, and then release it.

  • With this operation, the printer will stop monitoring the remaining ink level for the ink tank(s) in question. Please be advised that Canon shall not be liable for any printer malfunction or damage caused by refilled ink tanks.

Note If the function for detecting the remaining ink level is disabled, the ink tank is displayed in gray on the printer status monitor (Windows) and Canon IJ Printer Utility (Macintosh®).

Fourteen (14) Flashes:

Ink tank cannot be recognized.

  • The ink tank is not compatible with this printer. (The lamp on the ink tank is off.)

  • Install an appropriate ink tank.

Note Refer to Routine Maintenance for additional information to check the ink tank status.

Fifteen (15) Flashes:

Ink tank cannot be recognized.

Note Refer to Routine Maintenance for additional information to check the ink tank status.

Sixteen (16) Flashes:

Ink has run out.

  • Ink has run out. (The lamp on the ink tank flashes.)

  • Replace the ink tank and close the Top Cover.

  • Printing under the current condition may damage the printer.

  • If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the RESUME / CANCEL button for at least 5 seconds, and then release it.

  • With this operation, the printer will stop monitoring the remaining ink level for the ink tank(s) in question. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.

Note If the function for detecting the remaining ink level is disabled, the ink tank is displayed in gray on the printer status monitor (Windows) and Canon IJ Printer Utility (Macintosh®).

Nineteen (19) Flashes:

An unsupported USB hub is connected.

 If a PictBridge compliant device is connected via a USB hub, remove the hub and connect it directly to the printer.

Sours: https://support.usa.canon.com/kb/index?page=content&id=ART

Green light flashing canon printer

Operation Panel

* All lamps on the operation panel are shown lit in the illustration below for explanatory purposes.

(1) ON button

Turns the power on or off.Before turning on the power, make sure that the document cover is closed.

Turning the Machine On and Off

(2) ON lamp

Lights green after flashing when the power is turned on.

 Note

ON and Alarm lamps

 You can check the status of the machine by the ON and Alarm lamps.

– ON lamp is off: The power is off.

– ON lamp lights green: The machine is ready to print.

– ON lamp flashes green: The machine is getting ready to print, or printing is in progress.

– Alarm lamp flashes orange: An error has occurred and the machine is not ready to print.

"Support Code Corresponding to the Number of Flashes of the Alarm Lamp" in If an Error Occurs

– ON lamp flashes green and Alarm lamp flashes orange alternately: An error that requires contacting the service center may have occurred.

"Support Code Corresponding to the Number of Alternate Flashes of the ON Lamp and the Alarm Lamp" in If an Error Occurs

(3) Alarm lamp

Lights or flashes orange when an error occurs, such as paper-out or ink-out.When performing machine maintenance or machine settings, options can be selected according to the number of flashes.

(4) ink lamps

Light or flash orange when ink runs out, etc.

The upper lamp indicates the black FINE cartridge status, the lower lamp the color FINE cartridge status.

(5) Stop button

Cancels operations.You can press this button to cancel a print, copy, or scan job in progress.Holding this button down lets you select maintenance options or machine settings.

(6) Black button*

Starts black & white copying.You can also press this button to finalize your selection for the setting item.

(7) Color button*

Starts color copying.You can also press this button to finalize your selection for the setting item.

* In the software applications or manuals, the Color and Black buttons are collectively called the "Start" or "OK" button.

Sours: https://ij.manual.canon/ij/webmanual/Manual/W/MG%20series/EN/BG/bg-componenthtml
How To Hard Reset Canon Pixma Mg 2470 \u0026 Mg 2570s Printer । Print error \u0026 Scanner error fix

She picked up the phone and gave the patient's full name. The doctor, looking at her pussy for a long time, enjoyed more, and did not do business. He crawled up and down her insides, never finding solid. Evidence, against the diagnosis of an owl.

Now discussing:

Having suffered a second setback, his palm began to fall down again, grabbing an elastic partition above it. Feeling the beginning of the deepening of the folds, the middle finger slid convulsively between them, displacing the strap of his panties. She slid like a guide along her finger to the upper part of her palm, and then hid in the next hollow.

Having finally fallen into the recess between the large sponge and the thigh, this part of the light panties was no longer an obstacle.



90 91 92 93 94